00 (357) 25 747638

Services

MARINE SURVEYING SERVICES

Resolute to excellence, we champion a thorough and proficient service.

Amalgamating the knowledge of our highly qualified Marine Engineers, Naval Architects and Master Mariners with the key appointments GMCG has achieved with various governments and classification societies, enables us to provide a breadth of marine and technical surveys globally with exceptional expertise.

STATUTORY SURVEYS

GMCG’s proficiency in conducting statutory surveys – Safety of Life at Sea (SOLAS), Prevention of Marine Pollution from Ships (MARPOL), Load Lines (LL) and Tonnage Measurements – has expedited our being empanelled as safety inspectors and surveyors for many Flag State administrations. Consequently, and on behalf of its principals, GMCG is authorised to conduct statutory surveys, safety inspections and a number of additional related services for 16 countries including:

• Honduras
• Marshall Islands
• Palau
• Panama
• St. Kitts & Nevis

Additionally, GMCG has been nominated as business development consultants for Class Societies – the Polish Register of Shipping (PRS) and International Register of Shipping (IRS).

MISCELLANEOUS SURVEYS

Our network of associates around the world are also qualified to conduct the following additional surveys:

• Pre-entry and damage surveys for insurance
• Chartering and cargo related surveys, including:

  • preloading inspections
  • cargo hold / tank inspections
  • on-hire / off-hire surveys
  • vetting inspections

• Third party inspections

MARINE ENGINEERING SERVICES

Delivering precision and assured quality.

Through our extensive scope of services, our exceptional global network of experienced naval architects, marine engineers, offshore experts and technicians are fully equipped to respond and effectuate your technical requirements.

MARINE ENGINEERING & NAVAL ARCHITECTURE

• Ship design and modifications
• Stability analysis and documentation
• Ballast water management planning
• Marine propulsion and electrical consultancy
• Computations and calculations under various IMO conventions, including Tonnage and Load Line
• Fully digitalised drawings and electronic drafting
• Preparation of manuals including:

  • CSM: Cargo Securing Manual
  • GMP: Garbage Management Plan
  • HSE: Health & Safety Executive Manual
  • ISM: International Safety Management
  • ISO: International Organization for Standardization
  • ISPS: International Ship & Port Facility Security
  • SOPEP: Shipboard Oil Pollution Emergency Plan
  • SSP: Ship Security Plan

OFFSHORE ENGINEERING

• Offshore structural design and engineering analysis
• Load out, sea fastening, lashing calculation and mooring analysis for barges and ships
• Transportation analysis of pipes and heavy equipment
• Supervision of offshore pipeline installations and inspections
• Plant shutdown and reactivation consultancy

NON-DESTRUCTIVE TESTING (NDT)

1 Ultrasonic thickness gauging using advanced techniques including rope access rafting in voyage survey.
Approved by:

  • American Bureau of Shipping (ABS)
  • Bureau Veritas (BV)
  • Indian Register of Shipping (IR Class)
  • International Register of Shipping (IRS)
  • Lloyd's Register (LR)
  • Russian Maritime Register of Shipping (RMRS)
  • Nippon Kaiji Kyokai (ClassNK)
  • Registro Italiano Navale (RINA)
  • Det Norske Veritas - Germanischer Lloyd (DNV-GL)
2 Anchor chain calibration reports
3 Pipeline inspection and pipeline gauging
4 Welding and painting inspection
5 Steel weight estimation

PROJECT MANAGEMENT

• Work supervision and project monitoring across all assignments as listed above
• Supervising new building and ship repair on behalf of owners
• Project planning and management of vessel fabrication and construction
• Executing detailed project reports and feasibility studies
• Third party inspection of products

OFFSHORE, OIL & GAS SERVICES

ABOUT

GMCG engineering consultancy services team comprises of experienced and talented pool of professional engineers with hands on experience in the oil & gas/shipbuilding engineering industry who can provide economic and practical solutions to complex oil & gas /shipbuilding engineering activities. Since its establishment in 1988, GMCG has provided outstanding services in the field of marine engineering consultancy. Through our extensive scope of services, our exceptional global network of experienced naval architects, marine engineers and offshore experts with combined experience of more than 500 years, we promise to provide you the most efficient of solutions.

We aim to provide safe, efficient and cost-effective engineering solutions to our clients by working closely with them and understanding their needs. Our focus is on delivering certainty and quality of the engineering works undertaken.

Our Portfolio

Safety

• Safety case for Offshore Structures
• Risk and Safety studies
• Loss Prevention Studies
• Reliability Studies
• Process/Non Process Hazard Studies
• Asset Management services
• Fire Safety
• Simulation Services

Trainings

• FPSO Operational Excellence Course
• Offshore Safety and Systems
• Offshore Drilling Operations
• Offshore Well development Course
• Jackup operational course
• Ship design and Shipbuilding
• Ports and Terminals
• Maritime Management Courses
• Ship Recycling

PHA

• HAZID
• HAZOP
• ENVID
• PHSER
• Working Environmental Analysis
• SIMOPS/MOPO/BOWTIE
• OHID/OHRA/HRA/HCA

QRA

Reliabilities Study

Loss prevention Activities

Noise and Vibration Studies

Trainings

• FPSO Operational Excellence Course
• Offshore Safety and Systems
• Offshore Drilling Operations
• Offshore Well development Course
• Jackup operational course
• Ship design and Shipbuilding
• Ports and Terminals
• Maritime Management Courses
• Ship Recycling

Structural Engineering

• Engineering criticality assessment (FEM Studies)
• Fatigue analysis
• Global in-place analysis
• Hull global strength analysis
• Life extension services for MOUs
• CAP fatigue analysis for ships
• Small modification analysis
• Drawing preparations

Machinery & safety, E&I

• All marine and drilling systems engineering
• Equipment sizing and calculations
• Equipment modifications
• Jacking system specialized consultancy
• Electrical design services
• Rig Inspection

Naval Architectural Engineering

• New build design (small and medium size vessels)
• Feasibility study for conversion
• Engineering for conversion
• Motion analysis, Mooring analysis
• Transportation analysis
• Naval arch drawing preparation
• Inclining Experiment, Preparation of Trim & Stability Booklet, Damage Stability calculations
• Preparation of Manuals (SSP, ISM, ISO, SOPEP, SMPEP, SSA, Cargo Securing Manuals & Garbage Management Plans)
• Tonnage, Load line, Freeboard & Scantling
• Safe Access to Bow, Towing Arrangement in compliance to OCIMF regulations

Rig Inspections

• Specialized Rig Inspections
• Rig Selection Survey
• Rig Condition Survey
• Rig Acceptance Survey
• Rig Intake and Rig Activations
• Rules and Regulation Compliance

FPSOs

• Project Management Consultancy
• Specialized FPSO Topside Operations Team
• Topside process consultancy
• Marine side consultancy
• Mooring Analysis for FPSOs

Environmental

• Environment Impact Assessment
• Detailed Project Reports
• Environmental Audits
• Environmental Management Plan
• Feasibility Studies
• Waste Management Studies
• Environmental Monitoring

Non-Destructive Testing (NDT)

• Ultrasonic thickness gauging using advanced techniques including rope access rafting in voyage survey.
• Approved by:
American Bureau of Shipping (ABS), Bureau Veritas (BV), Indian Register of Shipping (IR Class),
International Register of Shipping (IRS), Lloyd’s Register (LR), NKK Shipping & Logistics Pvt. Ltd.
(NKK), Russian Maritime Register of Shipping (RMRS). • Anchor chain calibration reports, Pipeline inspection and pipeline gauging
• Welding and painting inspection, Steel weight estimation

Project Management

The services include:
• Work supervision and project monitoring
• Supervising new building and ship repair on behalf of owners
• Project planning and management of vessel fabrication and construction
• Executing detailed project reports and feasibility studies

Why choose GMCG Offshore Consultants

• Global Presence
• Quick response through global network
• Consultants available around the clock
• Highly experienced consultants with operational knowledge
• We understand importance of Operations
• High quality and efficiency
• Dedicated local point of contact
• Zero down time is our goal for you
• Highly experienced team
• Vast knowledge bank within organization

For enquiries email to offshore.engg@gmcg.global

Copyright © GMCG 2019. All rights reserved.